Powder Coating Services

• Free Quotes

• Competitive Pricing

• NFIB Accredited Business

This is a placeholder for the Yext Knolwedge Tags. This message will not appear on the live site, but only within the editor. The Yext Knowledge Tags are successfully installed and will be added to the website.

Hours:

This is a placeholder for the Yext Knolwedge Tags. This message will not appear on the live site, but only within the editor. The Yext Knowledge Tags are successfully installed and will be added to the website.

From Commercial to Custom Powder Coating

Powder Coating Solutions, located in an 11,000 sq. ft. finishing plant, offers the following:

  • Abrasive blasting
  • Coating - GEMA Optiflex 2 guns
  • Lead times - turnaround times as short as 8 hours on scheduled work
  • Masking - full selection of high temp tapes, plugs, and caps
  • Ovens - two PQ Ovens; 5' x 6' x 8' 365,000 BTU and 7' x 7' x 17' 895,000 BTU
  • Packaging direct shipment
  • Pre-treatment - the iron phosphate spray wash
  • Spray booths - two JBI spray booths; 6' x 10' and 10' x 12'

Choosing Your Finish

Clearly, you want to enhance the item being coated. A high gloss finish will accentuate any defects. Pitted surfaces and poorly cast parts are better suited to textured powders such as veins, rivers, wrinkles, or lower gloss coatings. Contact us to learn more about our powder coating service.

Choosing Your Color

When customers say they want the color to be charcoal grey, we say, "Which charcoal grey do you want?" There are as many shades in powder as there are in liquid paint!


We are a customer-focused business and aim to provide quality service at affordable pricing. Contact us for FREE quotes and competitive pricing.

General Information

  • Price quotes are for "in stock," single-stage colors. Custom colors are an additional charge.
  • Additional costs (required for some powders) add extra cost.
  • Prices do not include sandblasting or stripping.
  • It is the customer's responsibility to disassemble parts before pre-treatment. Parts should be clean and free of oil and grease.
  • All bearings, seals or gaskets, bushings, etc. must be removed. Parts received that require the removal of such parts will be priced accordingly.
  • Items cannot contain any Bondo or filler.
  • Chemical pre-treatment and an abrasive media will be used on the parts.


NOTE: Powder Coating Solutions is not responsible for poorly cast parts that may have surface imperfections. Some castings "Out gas" during the curing process, which is beyond our control. If you provide us with show-quality parts, you will receive a show-quality finish.

Trust Our 17 Years of Experience

Call us for competitive pricing.

(651) 345-7507

(651) 345-7507

Learn More About

Powder Coating Solutions

Play Video